top of page

SMART CONTROLLERS

General details

The "drone-tweaks" FCC apps can be used both for flying normally with the standard controllers but now also to switch the DJI RC, RC2 and RC Pro to FCC mode.

The general idea is to use the QuickTransfer functionality to switch the drone and controller to FCC and then fly as normal with the smart controller in FCC mode.

​

Important things to consider

  • if you have several drones, some with standard controllers and some with smart controllers, you can now use the same app for all of them

  • this is a very short procedure (~15 seconds) but it must be done before each flight

  • restarting the drone or controller will reset the mode back to CE

  • completely losing signal between drone and controller (no video, no telemetry and image goes black & white) will reset the mode back to CE

Supported drones:

  • Mini 3 Pro

  • Mini 4 Pro

  • Air 3

  • Mavic 3

  • Mavic 3 Classic

  • Mavic 3 Pro

Procedure details:

​​

  1. ​Start drone and smart controller and wait for the drone to acquire GPS and update the home point

  2. Launch the FCC app

  3. Connect to the drone via Quick Transfer

  4. Once connected, tap Exit Quick Transfer on the smart controller

  5. Close the phone and enjoy flying with the smart controller in FCC

RC_Android.png
RC_iOS.png

​

​

  1. Launch the FCC app and keep it running in the background​

  2. Start drone and smart controller and wait for the drone to acquire GPS and update the home point

  3. Launch the official DJI Fly app

  4. Connect to the drone via Quick Transfer

  5. As soon as the drone is connected, switch directly to the FCC app

  6. Tap Exit Quick Transfer on the controller

  7. Close the phone and enjoy flying with the smart controller in FCC

 

bottom of page